KAP-RIG 2013 (unfortunately demolished in the meantime)
Unfortunately, this RIG no longer exists, as it fell out of the kite line during an unprofessionally prepared mission and disintegrated into its individual parts on the asphalt of Dortmund’s Fredenbaumplatz.
For the sake of completeness, however, I will continue to list it as an item of equipment, especially as I have listed the individual weights and acquisition costs for this assembly.
Frame: 30 x 5 mm strips of beech wood
Camera shutter release via CHDK
4 x eneloop NiMH Mignon batteries 2000 mAh
Modelcraft Mini-Servo WG-90MG Single ball bearing gearbox metal JR for tilting
Micro Maestro 6-Channel USB Servo Controller
Futaba S 3003 servo for PAN, converted to endless rotation
Conrad gears 10Z/40Z
Parts List
| Nr. | description | Material | Weight (Gramm) | Cost (€) | % | Alternative |
| 1 | Canon S 95 incl. batteries | Plastic/metal | 193 | 279 | 38 | |
| 2 | Inner frame compl. with rudder horn | Wood(Beech) | 23,25 | 5 | ||
| 3 | Side parts outside with mini-servo | Wood (Beech) | 33,05 | 6 | ||
| 4 | Top bridge with servo, pinion and shaft | Wood (Beech) | 84,6 | 16 | ||
| 5 | Maestro Servo Controller | 4,8 | 15,5 | 1 | ||
| 6 | Akku-Pack (4 AA, 2000 mAh) | 108 | 21 | 4x Micro (AAA, 800 mAh) 52g | ||
| 7 | Feet ( 4 pieces) | CFK | 10 | 2 | ||
| 8 | Foot holder | Alu | 15 | 3 | ||
| 9 | Camera screw | Alu | 35 | 7 | ||
| 10 | Small parts: Cable, bearing, sleeve | 7 | 1 | |||
| Total weight 513,7g | 100 |
